https://www.ebay.com.au/itm/2X-Barb-Red ... 2749.l2649
These elbows are the closest I can find for the gauge on the fuel tank and you need rubber gromets to fit them petrol resistant.
My Montesa 349 Project
Moderator: Moderators
Re: My Montesa 349 Project
Finally Got a new light switch that isn't broken cost a fortune
There has been a long gap as last year and this year and next year is car restoration work Haven't been doing it myself so that is where the spare $$$ have gone.
There has been a long gap as last year and this year and next year is car restoration work Haven't been doing it myself so that is where the spare $$$ have gone.
Re: My Montesa 349 Project
Will be dragging this out from under the dust in a few months to finish it off I've had a lot of projects on over the last few years and I've had to be patient to get through them 3 cars rust removed and painted many mechanical repairs so I am looking forward to getting her out again.
These fit the 349 tanks perfectly.
https://www.ebay.com.au/itm/2X-Barb-Red ... 2749.l2649
Now I got the grommets from south west montesa but seems his site has gone so try buying petrol and oil grommet and if that doesn't work possibly one from a bong shop in Nimbi might be suitable or might not be. With oil in resin I imagine the rubber grommets might be compatible with oils hence compatible with petrol. Worth a try if you can't find correct size next option is to go up in size and drill to suit or get a brass barb made to suit.
These fit the 349 tanks perfectly.
https://www.ebay.com.au/itm/2X-Barb-Red ... 2749.l2649
Now I got the grommets from south west montesa but seems his site has gone so try buying petrol and oil grommet and if that doesn't work possibly one from a bong shop in Nimbi might be suitable or might not be. With oil in resin I imagine the rubber grommets might be compatible with oils hence compatible with petrol. Worth a try if you can't find correct size next option is to go up in size and drill to suit or get a brass barb made to suit.
Re: My Montesa 349 Project
20 years and still haven't finished it better pull the finger out. Mrs has dementia now so I have been kept busy looking after her.
Re: Montesa 349 Project
Kombivan wrote:billy wrote:David Lahey wrote:Is there something special about that fuel tap? All the spanish fibreglass tanks I have use 12mm female thread in the tank and taps for these are readily available. One local supplier would be Bultaco Parts Australia http://www.bultacoaustralia.com
Another would be Don Newell in Brisbane
There is a difference. The outlet comes out the side pointing to the rear, not the bottom, in order to avoid the engine brace. Zoom in on the photo. Fuel line not fitted.
Billy what is the distance from the ring around the M to your gear lever inside edge. Does anyone know if the 349 cota were put together with copper seals or rubber seals on the crankcase bolts when new?
I not happy with the gear selector mechanism on mine in the primary drive case and I want to be sure its correct. Had to pull the magneto side off again as I forgot the locking washer. There is only one left handed locking washer on the bike and I found it in my tin of left over parts.
THEY WERE PUT TOGETHER WITH THIN GASKET PAPER/CARDBOARD THE CASINGS.
the 349 1979 and 1980 models are set up differently with the gear selector the spacer at the back is fitted differently as one model sits a different space from the casing to the otherI think the 1979 is closer just not sure.
Share on Facebook
Share on Twitter
Share on Google+
Re: My Montesa 349 Project
Some of these contacts are over 20 yo and I don't know if their some have passed. So if they don't answer their email leave it at that. Many aren't busisness but riders that had extra bits etc.
"GARY GWILLAM" <gary@gwillam5397.freeserve.co.uk> [Edit] [Email]
"S.Hammer M-K-E" <mail@motorrad-klassiker-ersatzteile.de> [Edit] [Email]
"Todd Stewart" <ttstewart@comcast.net> [Edit] [Email]
11redrex (brakepads) [Edit]
John@Culley.freeserve.co.uk , 0777 9007709 (h)
a.gillingham@ntlworld.com [Edit] [Email]
Bates, Jarrod (ASouthWestMontesa) [Edit]
jbates@cox.net
bobnamyegan@aol.com [Edit] [Email]
dan [Edit]
dan@dallanmotorcycles.com
dave-evans@tiscali.co.uk [Edit] [Email]
enduro (enduro) [Edit]
boatsforyou@optusnet.com.au
evans, david [Edit]
dave-evans1@tiscali.co.uk
Fisher, Dan [Edit]
dmi@dallanmotorcycles.com
forks (forks) [Edit]
pgsaw@shaw.ca
framecota (framecota) [Edit]
bobnamyegan@aol.com
grahamguppy@btconnect.com [Edit] [Email] --------------Think this guy may have been the shockie guy----
Green, Simon (348) [Edit]
Simon Green <s.green@ocean-estate.co.uk>
kathyp@wvi.com [Edit] [Email]
"GARY GWILLAM" <gary@gwillam5397.freeserve.co.uk> [Edit] [Email]
"S.Hammer M-K-E" <mail@motorrad-klassiker-ersatzteile.de> [Edit] [Email]
"Todd Stewart" <ttstewart@comcast.net> [Edit] [Email]
11redrex (brakepads) [Edit]
John@Culley.freeserve.co.uk , 0777 9007709 (h)
a.gillingham@ntlworld.com [Edit] [Email]
Bates, Jarrod (ASouthWestMontesa) [Edit]
jbates@cox.net
bobnamyegan@aol.com [Edit] [Email]
dan [Edit]
dan@dallanmotorcycles.com
dave-evans@tiscali.co.uk [Edit] [Email]
enduro (enduro) [Edit]
boatsforyou@optusnet.com.au
evans, david [Edit]
dave-evans1@tiscali.co.uk
Fisher, Dan [Edit]
dmi@dallanmotorcycles.com
forks (forks) [Edit]
pgsaw@shaw.ca
framecota (framecota) [Edit]
bobnamyegan@aol.com
grahamguppy@btconnect.com [Edit] [Email] --------------Think this guy may have been the shockie guy----
Green, Simon (348) [Edit]
Simon Green <s.green@ocean-estate.co.uk>
kathyp@wvi.com [Edit] [Email]
Re: My Montesa 349 Project
brights_cycle_salvage@hotmail.com ~ asshole
michandmike@onetel.com [Edit] [Email]
Mike, Mich and [Edit]
michandmike@onetel.com
Montesa Lighting Kit (Parts) [Edit]
sbirc@aol.com
MontesaBultaco (MontesaBultaco) [Edit]
dave@bultacouk.com
mountain, frankie [Edit]
frankiemountain@hotmail.com
newstuff (newstuff) [Edit]
cbpaulson@hotmail.com
nocke@motorrad-klassiker-ersatzteile.de [Edit] [Email]
chaeo@mail.ev1.net
Nolen, Chuck [Edit]
cnolen@houston.rr.com
oucwboy@aol.com [Edit] [Email]
Patterson, Kathy (Montesastuff) [Edit]
kathyp@wvi.com
michandmike@onetel.com [Edit] [Email]
Mike, Mich and [Edit]
michandmike@onetel.com
Montesa Lighting Kit (Parts) [Edit]
sbirc@aol.com
MontesaBultaco (MontesaBultaco) [Edit]
dave@bultacouk.com
mountain, frankie [Edit]
frankiemountain@hotmail.com
newstuff (newstuff) [Edit]
cbpaulson@hotmail.com
nocke@motorrad-klassiker-ersatzteile.de [Edit] [Email]
chaeo@mail.ev1.net
Nolen, Chuck [Edit]
cnolen@houston.rr.com
oucwboy@aol.com [Edit] [Email]
Patterson, Kathy (Montesastuff) [Edit]
kathyp@wvi.com
Re: My Montesa 349 Project
pigylover@iprimus.com.au [Edit] [Email]
Renham, Dave (Dave) [Edit]
dave@bultacouk.com
sales@proven.com.au [Edit] [Email]
scorpian (scorpian) [Edit]
motorchimp5@hotmail.com
Stewart, Todd [Edit]
ttstewart@comcast.net
timinggaugepuller (timing gauge puller) [Edit]
info@bultacouk.com
tystuffandfenders (ty stuff and fenders) [Edit]
john.cane@ntlworld.com
ukroy@ freenetname.co.uk [Edit] [Email]
vdb@houston.rr.com [Edit] [Email]
warehouse (warehouse) [Edit]
cbpaulson@hotmail.com
wheelbearings (wheelbearings) [Edit]
ukroy@freenetname.co.uk
Wheelbearingsmontesa (Wheelbearingsmontesa) [Edit]
ukroy@ freenetname.co.uk
Renham, Dave (Dave) [Edit]
dave@bultacouk.com
sales@proven.com.au [Edit] [Email]
scorpian (scorpian) [Edit]
motorchimp5@hotmail.com
Stewart, Todd [Edit]
ttstewart@comcast.net
timinggaugepuller (timing gauge puller) [Edit]
info@bultacouk.com
tystuffandfenders (ty stuff and fenders) [Edit]
john.cane@ntlworld.com
ukroy@ freenetname.co.uk [Edit] [Email]
vdb@houston.rr.com [Edit] [Email]
warehouse (warehouse) [Edit]
cbpaulson@hotmail.com
wheelbearings (wheelbearings) [Edit]
ukroy@freenetname.co.uk
Wheelbearingsmontesa (Wheelbearingsmontesa) [Edit]
ukroy@ freenetname.co.uk
Re: My Montesa 349 Project
My fuel taps I got from Vintage Dirt Bikes but he retired and sold his buisness name to a M/C wrecker. for fuel taps also southwest montesa should have the correct tap. might even have one just unsure.
Return to “Twinshock & Classic Trials”
Who is online
Users browsing this forum: Google [Bot] and 34 guests